Haltech IQ3 Logger Dash Manual do Utilizador descarregar pdf

TMTM

Haltech USA

704 Downs Ave.

Lexington, KY

(P) 760-598-1941

(F) 760-598-1987

RACEPAK IQ3 LOGGER DASH

PROGRAMMING

To program an IQ3 Display Dash, follow the steps below.

1) Connect the IQ3 dash to your Haltech Platinum Sport ECU - Supply Power to the ECU

2) Connect the IQ3 dash to your laptop via the Serial to USB Adapter

3) Open the Racepak Datalink Software

4) Press CTRL+Z and select the file . IQ3 PSPORT LOGGER

5)Go to Settings--> Scan Com Ports

This file must be placed in C:\RacepakData\IQ3 and can be downloaded from the Haltech website here

1 2 3 4 5

TMTMHaltech USA704 Downs Ave.Lexington, KY(P) 760-598-1941(F) [email protected] IQ3 LOGGER DASH PROGRAMMINGTo program an IQ3 Display

8) By default, the Iq3 Logger dash will display RPM, GPS Based Speed, AFR, Coolant Temp in F, Intake Air Temp in F, and Manifold Pressure in PSI. To

11) After you left click, the Display Page Setting box will appear. You can configure the following Options:Channel to Display --> Drop Down Menu,

16) For this example, we are going to use the EFI H2O Temp Channel and change from Degrees Celsius toDegrees Fahrenheit. Upon Right Clicking the Chan

18) Click Send Configuration. The new units should be displayed on your IQ3 Dash. Check this value against the displayed value in the Haltech ECU M

Sem comentários

Haltech IQ3 Logger Dash Manual do Utilizador